STV9211 Datasheet | STMicroelectronics

® 150 MHz PIXEL VIDEO CONTROLLER FOR MONITORS IN DC-COUPLING MODE Features q 150 q 2.7 q I MHz Pixel Rate ns Rise and Fall Time Bus Controlled q Support DC Coupling Application only q Brightness Selection (after or before Drive) q Grey Scale Tracking Versus Brightness q Infra Black Range Selection 1.3 or 1.8V (i.e: 26 or 36V in kit with STV95xx amplifier) q Infra Black Offset Selection 0.4 to 2.2V (i.e: 115 to 80V in kit with STV95xx amplifiers) q OSD Mixing q Beam Current Attenuation (ABL) q Pedestral Clamping on Output Stage q Possibility of Light or Dark Grey OSD Background q OSD Contrast Control q Input Black Level Clamping with Built-in Clamping Pulse q 5 V to 8 V Power Supply q Perfectly matched with the STV95xx ST Amplifier Family q Preamplifier Control (bandwidth and stand-by) q Amplifier Control (bandwidth and stand-by), only applicable to amplifiers with CTL pin or STDBY pins. 2C DIP20 (Plastic Package) ORDER CODE: STV9211 The RGB ining signals are amplified and shaped to drive in DC coupling the video amplifier without intermediate follower stages. One of the main advantages of ST devices is their ability to sink and source currents. These driving capabilities bined with an original output stage structure suppress any static current on the output pins and therefore reduce dramatically the power dissipation of the device. Extensive integration bined with high performance and advanced Features make the STV9211 one of the best choice for any CRT monitor. Perfectly matched with the ST video amplifiers STV95xx, they offer a plete solution for high performance and cost-optimized Video Board Application. DESCRIPTION The STV9211 is an I2C Bus controlled RGB preamplifier designed for Monitor applications, able to mix the RGB signals ing from any OSD device. The usual Contrast, Brightness, Drive and Cut-Off (Infra Black) Controls are provided. In addition, it includes the following Features : - High resolution cut-off (Infra Black)...