Datasheet4U Logo Datasheet4U.com

TDA7404D - CARRADIO-SIGNAL-PROCESSOR

General Description

The TDA7404D is a high performance signal processor specificall designed for car radio applications.

Key Features

  • Input Multiplexer 1 pseudo-differential stereo input (selectable single end stereo input) 3 single-end stereo inputs 1 differential mono input In-Gain 0..14dB, 1dB steps, 14..20dB, 2dB steps Auto Zero internal Beep with 3 frequencies 781Hz/1.56KHz/1.8KHz 4 step-mixing-stage with mono or beep as mix-signals second order frequenciy response programmable center frequency 15 x 1dB steps selectable low & high frequency boost selectable flat-mode (constant sttenuation) 1 dB attenuator 100dB range so.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TDA7404D CARRADIO-SIGNAL-PROCESSOR s s s s s s s s s 4 STEREO INPUTS 1 MONO INPUTS SOFTSTEP-VOLUME BASS, TREBLE AND LOUDNESS CONTROL DIRECT MUTE AND SOFTMUTE INTERNAL BEEP FOUR INDEPENDENT SPEAKER-OUTPUTS SUBWOOFER STEREO OUTPUT DIGITAL CONTROL: 2 q I C-BUS INTERFACE q AUDIO-FILTER CHARACTERISTICS PROGRAMMABLE cessor with fully integrated audio filters. The digital control allows a programming in a wide range of all the filter characteristics. By the use of a BICMOSprocess and a linear signal processing low distortion and low noise are obtained. SO28 ORDERING NUMBER: TDA7404D DESCRIPTION The TDA7404D is a high performance signal processor specificall designed for car radio applications.