Datasheet4U Logo Datasheet4U.com

TDE1708DFT - Intelligent power switch

General Description

The TDE1708DFT is an Integrated Power Switch with up to 48V Power supply capability.

Load to Gnd.

Key Features

  • Low side or high side switch configuration 6V to 48V supply voltage range Overload and short circuit protections Internal voltage clamping Supply and output reversal protection Thermal shutdown GND and vs open wire protection Adjustable delay at switch on Indicator status led driver +5V regulated aux. voltage High burst immunity A signal is internally generated to block the In signal, and prevent activation of the output switch,.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TDE1707DF lntelligent power switch STMicroelectronics
TDE1607 RELAY AND LAMP-DRIVER STMicroelectronics
TDE1647A RELAY AND LAMP-DRIVER STMicroelectronics
TDE1898C 0.5A HIGH-SIDE DRIVER INDUSTRIAL INTELLIGENT POWER SWITCH STMicroelectronics
TDE0124 Quadruple Operational Amplifier Thomson-CSF

Other Datasheets by STMicroelectronics

Part Number Description
TDE1707 Intelligent power switch
TDE1707BFP Intelligent power switch
TDE1707CFP Intelligent power switch
TDE1737 INTERFACE CIRCUIT - RELAY AND LAMP-DRIVER
TDE1747 INTERFACE CIRCUIT - RELAY AND LAMP - DRIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com TDE1708DFT Intelligent power switch Features ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Low side or high side switch configuration 6V to 48V supply voltage range Overload and short circuit protections Internal voltage clamping Supply and output reversal protection Thermal shutdown GND and vs open wire protection Adjustable delay at switch on Indicator status led driver +5V regulated aux. voltage High burst immunity A signal is internally generated to block the In signal, and prevent activation of the output switch, as long as an abnormal condition is detected. The power-on transition, as well as the chip over temperature and the output overcurrent, concur to the generation of such signal. A minimum delay of 25ms (Typ.