Datasheet4U Logo Datasheet4U.com

TEA6415CD - BUS-CONTROLLED VIDEO MATRIX SWITCH

General Description

The main function of the TEA6415C is to switch 8 video input sources on the 6 outputs.

Each output can be switched to only one of the inputs whereas but any same input may be connected to several outputs.

All the switching possibilities are controlled through the I2C bus.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TEA6000 FM/IF SYSTEM AND MICROCOMPUTER-BASED TUNING INTERFACE NXP
TEA6017AT Digital configurable LLC and multimode PFC controller NXP
TEA6100 FM/IF system and microcomputer-based tuning interface NXP
TEA6101 Antenna diversity circuit NXP
TEA6101T Antenna diversity circuit NXP

Other Datasheets by STMicroelectronics

Part Number Description
TEA6415C BUS-CONTROLLED VIDEO MATRIX SWITCH
TEA6415 Bus Controlled Video Matrix Switch
TEA6415B Bus Controlled Video Matrix Switch
TEA6414 Bus Controlled Video Matrix Switch
TEA6414A Bus Controlled Video Matrix Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TEA6415C BUS-CONTROLLED VIDEO MATRIX SWITCH s s s s s s s s s 20MHz BANDWIDTH CASCADABLE WITH ANOTHER TEA6415C (INTERNAL ADDRESS CAN BE CHANGED BY PIN 7 VOLTAGE) 8 INPUTS (CVBS, RGB, MAC, CHROMA, ...) 6 OUTPUTS POSSIBILITY OF MAC OR CHROMA SIGNAL FOR EACH INPUT BY SWITCHING-OFF THE CLAMP WITH AN EXTERNAL RESISTOR BRIDGE BUS CONTROLLED 6.5dB GAIN BETWEEN ANY INPUT AND OUTPUT -55dB CROSSTALK AT 5MHz FULLY ESD PROTECTED DIP20 (Plastic Package) ORDER CODE : TEA6415C DESCRIPTION The main function of the TEA6415C is to switch 8 video input sources on the 6 outputs. Each output can be switched to only one of the inputs whereas but any same input may be connected to several outputs. All the switching possibilities are controlled through the I2C bus.