VND5025LAK-E
Description
The VND5025LAK-E is a monolithic device made using STMicroelectronics VIPower M0-5 technology, intended for driving resistive or inductive loads with one side connected to ground, and suitable for driving LEDs. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility.
Key Features
- Typical value with all loads connected
- VCC RON ILIMH IS 41V 25mΩ 60A 2µA(1) PowerSSO-24™ VCC 4.5 to 36V - Thermal shut down - Reverse battery protection(a) - Electrostatic discharge protection Features - In-rush current active management by power limitation - Very low stand-by current - 3.0V CMOS compatible input - Optimized electromagnetic emission - Very low electromagnetic susceptibility - In compliance with the 2002/95/EC European directive - Package: ECOPACK®
- Diagnostic functions - Proportional load current sense - High current sense precision for wide range currents - Current sense disable - Thermal shutdown indication - Very low current sense leakage
- Protection - Undervoltage shut-down - Overvoltage clamp - Load current limitation - Self-limiting of fast thermal transients - Protection against loss of ground and loss of VCC Table
- Order codes Package PowerSSO-24™ a. See Figure 26: Application schematic
