54VCXH163245 Datasheet | STMicroelectronics

Features - Dual supply bidirectional level shifter - Voltage range from 1.6 V to 3.6 V - Separated enable pin for 3-state output - Internal 26 Ω limiting resistor on each A side output buffer - Bus hold - Fail safe - Cold spare - Hermetic package - 300 k/rad (Si) at any Mil1019 dose rate - SEL immune to 110 Me V.cm2/mg LET ions Description The 54VCXH163245 is a rad-hard advanced high-speed CMOS, 16-bit bidirectional, multi-purpose transceiver with 3-state outputs and cold sparing. Designed to be used as an interface between a 3.3 V bus and a 1.8 V bus in mixed 3.3 V/1.8 V supply systems, it achieves high-speed operations while maintaining the CMOS low power dissipation. All pins have cold spare buffers to change them to high impedance when VDD is tied to ground. This IC is intended for a two-way asynchronous munication between data buses. The direction of data transmission is determined by the n DIR inputs. DS11681 - Rev 7 - September 2021 For further information contact your local STMicroelectronics sales office. .st. Functional description Figure 1. Logic diagram Functional description Inputs m G m DIR Table 1. Truth table Function Bus A Bus B Output Input Input Output...