74AC245 Datasheet | STMicroelectronics

DESCRIPTION isolated.. The 74AC245 is an advanced high-speed CMOS .. All floating bus terminals during HIGH-Z state OCTAL BUS TRANSCEIVER (3-STATE) must be held HIGH or LOW fabricated with sub-micron silicon gate and All inputs and outputs are equipped with double-layer metal wiring C2MOS tecnology. protection circuits against static discharge, giving This IC is intended for two-way asynchronous them 2KV ESD immunity and transient excess munication between data buses and the voltage. direction of data transmission is determined by PIN CONNECTION AND IEC LOGIC SYMBOLS April 2001 1/9 INPUT AND OUTPUT EQUIVALENT CIRCUIT PIN DESCRIPTION PIN No 1 2, 3, 4, 5, 6, 7, 8, 9 18, 17, 16, 15, 14, 13, 12, 11 19 10 20 SYMBOL DIR A1 to A8 B1 to B8 NAME AND FUNCTION Directional Control Data Inputs/Outputs Data Inputs/Outputs G GND VCC Output Enable Input Ground (0V) Positive Supply Voltage TRUTH TABLE INPUTS G L L H X : Don’t Care Z : High Impedance FUNCTION DIR L H X A BUS OUTPUT INPUT Z B BUS INPUT OUTPUT Z OUTPUT Yn A=B B=A Z ABSOLUTE MAXIMUM RATINGS Symbol VCC VI VO IIK IOK IO Supply Voltage DC Input Voltage DC Output Voltage DC Input Diode Current DC Output Diode Current DC Output Current Parameter Value -0.5 to +7 -0.5 to VCC + 0.5 -0.5 to VCC + 0.5 ± 20 ± 20 ± 50 ± 400 -65 to +150 300 Unit V V V m A m A m A m A °C °C ICC or IGND DC VCC or Ground Current Tstg Storage Temperature TL Lead Temperature (10 sec) Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. REMENDED OPERATING CONDITIONS Symbol VCC VI VO Top dt/dv Supply Voltage Input Voltage Output Voltage Operating Temperature Input Rise and Fall Time VCC = 3.0, 4.5 or 5.5V (note 1) Parameter Value 2 to 6 0 to VCC 0 to VCC -55 to 125 8 Unit V V V °C ns/V 1) VIN from 30% to 70% of V CC 2/9 DC SPECIFICATIONS Test Condition Symbol Parameter VCC (V) 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 VOL Low...