Datasheet4U Logo Datasheet4U.com

BAT30F3 - Small signal Schottky diode

General Description

The BAT30F3 is a Schottky diode in a 2-bump, Flip-Chip package.

This device is specially suited for switching mode applications needing a low forward voltage drop diode.

The electrical parameters are guaranteed across the operating temperature range (- 30 °C to 85 °C).

Key Features

  • very low conduction losses negligible switching losses low capacitance diode Flip Chip, 2-bump package Flip Chip (2 bumps) Complies with the following standards.
  • IEC 61000-4-2 level 1:.
  • ±2kV (air discharge).
  • ±2kV (contact discharge) Figure 1.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BAT30 silicon schottky diode Siemens Semiconductor Group
BAT30S SMALL SIGNAL SCHOTTKY DIODES Pan Jit International
BAT32 Silicon Schottky Diode Siemens Semiconductor Group
BAT32LS General-purpose Schottky diode nexperia
BAT-0+ Fixed Attenuator Mini-Circuits

Other Datasheets by STMicroelectronics

Part Number Description
BAT30F4 30V signal Schottky diode
BAT30 Small signal Schottky diodes
BAT20J HIGH EFFICIENCY SWITCHING AND ULTRA LOW LEAKAGE CURRENT SCHOTTKY DIODE
BAT20JFILM HIGH EFFICIENCY SWITCHING AND ULTRA LOW LEAKAGE CURRENT SCHOTTKY DIODE
BAT41 Low capacitance small signal Schottky diodes

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
BAT30F3 Small signal Schottky diode Features ■ ■ ■ ■ very low conduction losses negligible switching losses low capacitance diode Flip Chip, 2-bump package Flip Chip (2 bumps) Complies with the following standards ■ IEC 61000-4-2 level 1: – ±2kV (air discharge) – ±2kV (contact discharge) Figure 1. Description The BAT30F3 is a Schottky diode in a 2-bump, Flip-Chip package. This device is specially suited for switching mode applications needing a low forward voltage drop diode. The electrical parameters are guaranteed across the operating temperature range (- 30 °C to 85 °C). Pin configuration (bump side) 1 A www.DataSheet.net/ B Figure 2. Schematic 1 A B October 2010 Doc ID 16915 Rev 2 1/10 www.st.com 10 Datasheet pdf - http://www.DataSheet4U.co.