BYT230Y-400 Datasheet | STMicroelectronics

FEATURES AND BENEFITS VERY LOW REVERSE RECOVERY TIME VERY LOW SWITCHING LOSSES LOW NOISE TURN-OFF SWITCHING 2 x 30 A 400 V 150 °C 1.3 V A1 K A2 A2 K A1 Max247 DESCRIPTION Dual 400V rectifiers suited for Switch Mode Power Supplies and other converters. Packaged in Max247, this device is also intended for use in welding equipment and tele power supplies. ABSOLUTE RATINGS (limiting values, per diode) Symbol VRRM IFRM IF(RMS) IF(AV) Parameter Repetitive peak reverse voltage Repetitive peak forward current RMS forward current Average forward current Tc = 105°C δ = 0.5 Per diode Per device tp=5 µs F=5k Hz Value 400 380 50 30 60 300 - 55 to + 150 150 A °C °C Unit V A A A IFSM Tstg Tj Surge non repetitive forward current Storage temperature range Maximum operating junction temperature tp = 10 ms Sinusoidal October 1999 - Ed: 3A 1/5 THERMAL RESISTANCES Symbol Rth (j-c) Rth(c) Parameter Junction to case Per diode Total Coupling Value 0.95 0.55 0.15 Unit °C/W °C/W When the diodes 1 and 2 are used simultaneously: ∆ Tj(diode 1) = P(diode1) x Rth(j-c)(Per diode) + P(diode 2) x Rth(c) STATIC ELECTRICAL CHARACTERISTICS (per diode) Symbol IR - VF - - Parameter Reverse leakage current Forward voltage drop Tests Conditions Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C Pulse test : - tp = 5 ms, δ < 2% - - tp = 380 µs, δ < 2% Min. Typ. 3 VR = VRRM IF = 30 A IF = 30 A IF = 60 A IF = 60 A 1.1 0.9 Max. 35 12 1.5 1.3 1.7 1.6 Unit µA m A V To evaluate the conduction losses use the following equation: P = 1.0 x IF(AV) + 0.01 IF2(RMS) RECOVERY CHARACTERISTICS Symbol trr Test Conditions Tj = 25°C IF = 0.5A IR = 1A Irr = 0.25A IF = 1A VR = 30V d IF/dt = - 15A/µs Min. Typ. Max. 50 100 Unit ns TURN-OFF SWITCHING CHARACTERISTICS (without serie inductance) Symbol t IRM IRM Test Conditions d IF/dt = - 120A/µs d IF/dt = - 240A/µs d IF/dt = - 120A/µs d IF/dt = - 240A/µs VCC = 200 V IF = 30A Lp = 0.05µH Tj = 100 °C Min. Typ. 50 9 12 A Max. 75 Unit ns TURN-OFF...