BYT30G-400 Datasheet | STMicroelectronics

EATURES AND BENEFITS VERY LOW REVERSE RECOVERY TIME VERY LOW SWITCHING LOSSES LOW NOISE TURN-OFF SWITCHING SMD PACKAGE DESCRIPTION Single rectifier suited for freewheeling in converters and motor control circuits. Packaged in D2PAK, this surface mount device is intended for use in high frequency inverters, free wheeling and polarity protection applications. 30 A 400 V 50 ns 1.4 V 1&3 D2PAK (Plastic) ABSOLUTE MAXIMUM RATINGS Symbol VRRM IF(RMS) IF(AV) IFSM IFRM Tstg Tj Parameter Repetitive peak reverse voltage RMS forward current Average forward current Surge non repetitive forward current Repetitive peak forward current Storage and junction temperature range Tc=100°C δ = 0.5 tp=10ms sinusoidal tp = 5µs f = 5 k Hz Value 400 50 30 350 280 - 40 to + 150 Unit V A A A A °C October 1999 - Ed: 3A 1/5 THERMAL RESISTANCE Symbol Rth (j-c) Junction to case Parameter Value 1 Unit °C/W STATIC ELECTRICAL CHARACTERISTICS Symbol IR - Parameter Reverse leakage current Test Conditions VR = VRRM Tj = 25°C Tj = 100°C VF - - Forward voltage drop - tp = 5 ms, δ< 2 % - - tp = 380 µs, δ < 2 % Min. Typ. Max. 35 6 1.4 1.5 Unit µA m A V IF = 30 A IF = 30 A Tj = 100°C Tj = 25°C Pulse test : To evaluate the conduction losses use the following equation : P = 1.1 x IF(AV) + 0.0095 IF2(RMS) RECOVERY CHARACTERISTICS Symbol trr Parameter Reverse recovery time Test Conditions Tj = 25°C Irr = 0.25 A Tj = 25°C d IF/dt = -15A/µs TURN-OFF SWITCHING CHARACTERISTICS Symbol t IRM Parameter Maximum reverse recovery time Maximum reverse recovery current Turn-off overvoltage coefficient Test Conditions Tj = 100°C IF = 30 A VCC = 200 V Lp < 0.05 µH d IF/dt = -120A/µs d IF/dt = -240A/µs d IF/dt = -120A/µs d IF/dt = -240A/µs 12 3.3 / 50 9 ns Min. Typ. Max. 75 Unit ns IF = 0.5A I R = 1A IF = 1A VR = 30V Min. Typ. Max. 50 100 Unit ns C factor IF = IF(AV) Tj = 100°C VCC = 60 V Lp = 1 µH d IF/dt = -30A/µs PIN OUT configuration in D2PAK: 2/5 Fig.1 : Average forward...