BYW29G-200 Datasheet | STMicroelectronics

EATURES AND BENEFITS VERY SMALL CONDUCTION LOSSES NEGLIGIBLE SWITCHING LOSSES LOW FORWARD AND REVERSE RECOVERY TIMES HIGH SURGE CURRENT SMD A NC 8A 200 V 35 ns 0.85 V D2PAK (Plastic) DESCRIPTION Single rectifier suited for switchmode power supply and high frequency DC to DC converters. Packaged in a surface mount package D2PAK, this device is intended for use in high frequency inverters, free wheeling and polarity protection applications. ABSOLUTE MAXIMUM RATINGS Symbol VRRM IF(RMS) IF(AV) IFSM IFRM Tstg Tj Parameter Repetitive peak reverse voltage RMS forward current Average forward current Surge non repetitive forward current (All pins connected) Repetitive peak forward current Storage and junction temperature range Tc=120°C δ = 0.5 tp=10ms sinusoidal tp = 5 µs f = 5 k Hz Value 200 16 8 80 75 - 40 to + 150 Unit V A A A A °C October 1999 - Ed: 2 1/5 THERMAL RESISTANCE Symbol Rth (j-c) Parameter Junction to case thermal resistance Value 2.8 Unit °C/W STATIC ELECTRICAL CHARACTERISTICS Symbol IR - Parameter Reverse leakage current Test Conditions VR = VRRM Tj = 25°C Tj = 100°C VF - - Forward voltage drop IF = 5 A IF = 10 A IF = 10 A Pulse test : - tp = 5 ms, duty cycle < 2 % - - tp = 380 µs, duty cycle < 2 % Min. Typ. Max. 10 0.6 0.85 1.05 1.15 Unit µA m A V Tj = 125°C Tj = 125°C Tj = 25°C To evaluate the conduction losses use the following equation : P = 0.65 x IF(AV) + 0.040 IF2(RMS) RECOVERY CHARACTERISTICS Symbol trr Parameter Reverse recovery time Test Conditions T j = 25°C Irr = 0.25 A T j = 25°C d IF/dt = -50A/µs tfr Forward recovery time Peak forward voltage IF = 0.5A I R = 1A IF = 1A VR = 30V 15 V 2 Min. Typ. Max. 25 35 ns Unit ns T j = 25°C IF = 1A d IF/dt = 100A/µs VFR = 1.1 x VF max T j = 25°C IF = 1A d IF/dt = 100A/µs PIN OUT configuration in D2PAK: 2/5 Fig.1 : Average forward power dissipation versus average forward current. P F(av)(W) =0.05 =0.1 =0.2 =0.5 =1 Fig.2 : Peak current versus form factor. 12 10 8...