STMicroelectronics BlueNRG-M2
The BlueNRG-M2 is a Bluetooth® LE system-on-chip application processor certified module, certified under Bluetooth LE specifications v5.2 and BQE qualified. The BlueNRG-M2 module supports multiple roles simultaneously and can act at the same time as Bluetooth master and slave device. The BlueNRG-M2 is based on the BlueNRG-2 system-on-chip and entire Bluetooth LE stack and protocols are embedded into module.| Part No. | BlueNRG-M2 |
|---|---|
| Datasheet | BlueNRG-M2 Download |
| Manufacturer |  STMicroelectronics |
| Description | Very low power application processor module |
| Buy | Stock & Price |
FEATURES
● Bluetooth v5.2 certified – Supports master and slave modes – Multiple roles supported simultaneously – LE data packet length extension● Embedded ST BlueNRG-2 BLE SoC – High performance, ultra-low power Cortex-M0 32-bit based core – Programmable embedded 256 kB Flash – 24 kB embedded RAM with data retention – Up to +8 dBm available output power – Down to -88 dBm Rx sensitivity – Up to 96 dB link budget with excellent link reliability
● Embedded BALF-NRG-02D3 integrated matched balun with harmonic filter
● Interfaces: – 1 x UART, 1 x I2C, 1xSPI, 14 x GPIO, 2 x multifunction timer, 10-bit ADC, watchdog and RTC, DMA controller, PDM stream processor, SWD debug interface
● On-board chip antenna (BLUENRG-M2SA) or PCB antenna (BLUENRGM2SP)
● Small form factor: 11.5 mm x13.5 mm
● Complemented with Bluetooth LE protocol stack library (GAP, GATT, SM, L2CAP, LL)
● AES secutity co-processor
● Bluetooth LE SDK with a wide range of available profiles
● Certification – CE qualified – FCC,...
