STMicroelectronics HDMI05-CL02F3
The HDMI05-CL02F3 chip is a low capacitance ESD protection for HDMI control pins. It also integrates pull-up resistor for I²C bus and pulldown resistor for hot plug detect and pull-up resistor for CEC line. The ESD protection circuitry prevents damage to the protected device when subjected to ESD surges up to 15 kV.| Part No. | HDMI05-CL02F3 |
|---|---|
| Datasheet | HDMI05-CL02F3 Download |
| Manufacturer |  STMicroelectronics |
| Description | control line ESD protection |
| Buy | Stock & Price |
FEATURES
● Low line capacitance: 12 pF max.● High efficiency in ESD protection
● Lead-free package
● Very thin package
● High reliability offered by monolithic integration
● High reduction of parasitic elements through integration and wafer level packaging Complies with the standards:
● IEC 61000-4-2 Level 4 – ± 15 kV (air discharge) – ± 8 kV (contact discharge)
● IEC 61000-4-2 Level 1 – ± 2 kV (air discharge) – ± 2 kV (contact discharge) Application Where ESD protection for HDMI control lines (CEC, HPD, SCL and SDA) is required:
● Mobile phones and communication systems
● Portable multimedia players
● Camcorder, digital still cameras
DESCRIPTION
Flip Chip 9 bumps Figure 1. Pin configuration (bump side) 321 SCL CEC 5V A SDA GND RPU2 B HPD GND RPU C Figure 2. Schematic A1 5V A2 CEC A3 SCL B3 SDA C3 HPD B2 and C2 are ground pins C1 B1 TM: IPAD is a trademark of STMicroelectronics. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
