HDMI2C1-14HDS
HDMI2C1-14HDS is ESD protection and signal conditioning manufactured by STMicroelectronics.
Features
- HDMI pliant from -40 to 85 °C
- 8 k V contact ESD protection on connector side
- Supports direct connection to low-voltage HDMI ASIC and/or CEC driver (down to 1.8 V)
- TMDS high bandwidth ESD protection patible with 4 K-2 K 60 fps.
- DDC (I2C) link protection, bi-directional signal conditioning circuit, and dynamic pull-up
- CEC bus protection, bi-directional level-shifter, backdrive protection, and independent structure from main power supply
- HEAC link protection
- HPD pull down and signal conditioning
- Short-circuit protection on 5 V output
- Over temperature protection
- Proposed in QFN 24 leads 500 μm pitch
Benefits
- Speed-up hardware design and certification of HDMI application
- Pin map sequence pliant with HDMI connector type A
- Minimal PCB footprint in consumer area
- Ultra low power consumption in stand-by mode
- Wake-up from stand-by through CEC bus
- Improved HDMI interface ruggedness and user experience
- Long and/or poor quality cable support plies with the following standards
- HDMI standard
- IEC 61000-4-2 level 4
- JESD22-A114D level 2
Applications
- Consumer and puter electronics HDMI Sink device such as:
- HD set-top boxes
- DVD and Blu-Ray Disk systems
- Notebook
- PC graphic cards
HDMI ™ : the HDMI logo and high definition multimedia interface are trademarks or registered trademarks of HDMI Licensing LLC.
Description
The HDMI2C1-14HDS is a fully integrated ESD protection and signal conditioning device for control links of HDMI transmitters (Source).
The HDMI2C1-14HDS is a simple solution that provides HDMI designers with an easy and fast way to reach full pliancy with the stringent HDMI CTS on a wide temperature range.
September 2015
This is information on a product in full production.
Doc ID025842 Rev 3
1/28
.st.
Contents
Functional...
