HDMIULC6-4SC6Y Datasheet | STMicroelectronics

Features - 4-line 15 k V ESD protection - Protects VBUS when applicable - Ultrahigh bandwidth - no influence on signal rise and fall times - maximized number of signal harmonics - Very low leakage current: 0.5 µA max. - Fast response time pared with varistors - SOT23-6L package - Ro HS pliant Benefits - ESD standards pliance guaranteed at device level, hence greater immunity at system level - ESD protection of VBUS when applicable. - High efficiency due to low residual voltage when confronted by an ESD surge - Minimized rise and fall times for maximum data integrity - Consistent D+ / D- signal balance: - Ultralow impact on intra-, inter-pair skew - Matching high bit rate HDMI requirements and ready for future evolution - Low PCB space occupation - 9 mm2 maximum footprint - Higher reliability offered by monolithic integration plies with these standards: - IEC 61000-4-2 level 4 - 15 k V air discharge - 8 k V (and up to 15 k V) contact discharge - production data SOT23-6L (JEDEC MO178AB) Applications - HDMI ports at 1.65 Gb/s and up to 3.2 Gb/s - IEEE 1394a, b, or c up to 3.2 Gb/s - USB 2.0 ports up to 480 Mb/s (Hi-Speed) - Ethernet port: 10/100/1000 Mb/s - Video line protection - AEC-Q101 qualified Description The HDMIULC6-4SC6Y is a monolithic, application specific discrete device dedicated to ESD protection of the HDMI connection. It also offers the same high level of protection for IEEE 1394a and IEEE 1394b/c, USB 2.0, Ethernet links, and video lines. Its ultrahigh cutoff frequency (5.3 GHz) secures a high level of signal integrity. The device topology provides this integrity without promising the plete protection of ICs against the most stringent ESD strikes. September 2012 This is information on a product in full production. Doc ID 018879 Rev...