Datasheet4U Logo Datasheet4U.com

IPS1025HF - high-side switch

General Description

The IPS1025HF and IPS1025HFQ are single high-side switch ICs able to drive capacitive, resistive or inductive loads with one side connected to ground.

Key Features

  • 8.65 V to 60 V operating supply voltage range.
  • 2.4 A operating output current.
  • Smart driving of capacitive load.
  • Fast demagnetization of inductive loads.
  • Under-voltage lock-out.
  • VCC over-voltage protection.
  • Output overload and over-temperature protection.
  • Case over-temperature protection.
  • Ground disconnection protection.
  • Overload and over-temperature event diagnostic pins.
  • Designed to meet IEC 610.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IPS1021 INTELLIGENT POWER LOW SIDE SWITCH International Rectifier
IPS1021PBF INTELLIGENT POWER LOW SIDE SWITCH International Rectifier
IPS1021R INTELLIGENT POWER LOW SIDE SWITCH International Rectifier
IPS1021RPBF INTELLIGENT POWER LOW SIDE SWITCH International Rectifier
IPS1021S INTELLIGENT POWER LOW SIDE SWITCH International Rectifier

Other Datasheets by STMicroelectronics

Part Number Description
IPS1025HFQ high-side switch
IPS1025H high-side switch
IPS1025H-32 high-side switch
IPS1025HQ high-side switch
IPS1025HQ-32 high-side switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
IPS1025HF, IPS1025HFQ Datasheet High efficiency, high-side switch with extended diagnostics, smart driving for capacitive loads and short propagation delay at power-on Product status link IPS1025HF IPS1025HFQ Product label Features • 8.65 V to 60 V operating supply voltage range • 2.4 A operating output current • Smart driving of capacitive load • Fast demagnetization of inductive loads • Under-voltage lock-out • VCC over-voltage protection • Output overload and over-temperature protection • Case over-temperature protection • Ground disconnection protection • Overload and over-temperature event diagnostic pins • Designed to meet IEC 61000-4-2, IEC 61000-4-4, IEC 61000-4-5 • Packages: PowerSSO-24 and QFN48L 8x6x0.