STMicroelectronics IPS160H
The IPS160H (IOUT < 2.5 A) and IPS161H (IOUT < 0.7 A) are monolithic devices which can drive capacitive, resistive or inductive loads with one side connected to ground. The 60 V operating range and Ron = 60 mΩ, combined with the extended diagnostic (Open Load, Over Load, Overtemperature) make the IC suitable for applications implementing the proper architectures to address higher SIL levels. The built-in overload and thermal shutdown protections guarantee the ICs, the application and the load against electrical and thermal overstress.| Part No. | IPS160H |
|---|---|
| Datasheet | IPS160H Download |
| Manufacturer |  STMicroelectronics |
| Description | Single high-side switch |
| Buy | Stock & Price |
FEATURES
● 8 V to 60 V operating voltage range● Minimum output current limitation: 0.7 A (IPS161H) or 2.5 A (IPS160H)
● Fast demagnetization of inductive load
● Non-dissipative short-circuit protection (cut-off)
● Programmable cut-off delay time using external capacitor
● Ground disconnection protection
● VCC disconnection protection
● Thermal shutdown protection
● Undervoltage lock-out
● Diagnostic signalization for: open load in off-state, cut-off and junction thermal shutdown
● Designed to meet IEC 61131-2
● PowerSSO12 package
APPLICATIONS
● Programmable logic control● Industrial PC peripheral input/output
● Numerical control machines
● Domotics
● Generic power supply switch
DESCRIPTION
Furthermore, in order to minimize the power dissipation when the output is shorted, a low-dissipative short-circuit protection (cut-off) is implemented to limit the output average current value and consequent device overheating.Cut-off delay time can be set by soldering an external capacitor or disabled by a resistor on pin 4 (CoD).
