IPS8160HQ Datasheet | STMicroelectronics

Features - Operating output current: 0.7 A (IPS8160HQ) or 1.0 A (IPS8160HQ-1) per channel - CMOS patible input - Very low standby current - Undervoltage shutdown - Overload and short-circuit protection with output current limitation - Junction overtemperature protection - Case overtemperature protection for thermal independence of the channels - Protection against loss of ground - Thermal shutdown diagnostic pin - Designed to meet IEC 61000-4-2, IEC 61000-4-4, IEC 61000-4-5 - Package: QFN48L 8x6x0.9 mm Applications - Programmable logic control - Vending machines - Industrial PC peripheral input/output - Numerical control machines - General high-side switch applications Description The IPS8160HQ and IPS8160HQ-1 are monolithic devices designed with STMicroelectronics VIPower M0-3 technology, intended to drive any kind of load with one side connected to ground. They can be driven by using a 3.3 V logic supply. They are suitable for applications with up to 0.7 A (IPS8160HQ) or 1 A (IPS8160HQ-1) steady-state operating current. Active current limitation bined with thermal shutdown and automatic restart protect the devices against overload. In overload conditions, the channel turns OFF and ON again automatically to maintain the junction temperature between TJSD and TR. If this condition causes the case temperature to trigger TCSD, then overloaded channels are turned OFF and can be turned back ON only when the case temperature decreases down to TCR. Non-overloaded channels continue to operate normally. The devices automatically turn OFF in case of ground pin disconnection. Devices are especially suitable for industrial applications conforming to IEC 61131. DS13934 - Rev 2 - May 2023 For further information contact your local STMicroelectronics sales office. .st. IPS8160HQ, IPS8160HQ-1 Block diagram Block diagram Figure 1. IPS8160HQ, IPS8160HQ-1 block diagram DS13934 - Rev 2 page 2/30 IPS8160HQ, IPS8160HQ-1 Pin connections Pin connections Figure 2....