L5962
Overview
L5962 is a very versatile device exploiting BCD technology characteristics to provide a complete set of regulated voltages covering all the needs of a car-radio set. In standby condition the device guarantees extremely low quiescent current (90 µA max 40 °C < T < 85 °C) and minimum operating voltage (4.5 V using an external Schottky diode for the back-up function).
- Step-down synchronous switching voltage regulator - Internal high-side/ Low-side NDMOS - 1.2 < Vout < 8 V selectable through external resistors - 1.2/2.5 A load current selected through dedicated pin - 185 kHz free-run frequency - SYNC function (220 < fsw < 400 kHz)
- Linear regulators - 3.3/5 V @ 150 mA standby regulator selected through dedicated pin (VSTBYSEL) - 5/8.5 V @ 350 mA switched linear regulator enabled and selected through I2C bus (VLR1) - 3.3/10 V @ 1 A switched linear regulator enabled and selected through I2C bus (VLR2)
- 2 High side drivers (0.5 V max drop @ 0.5 A) enabled through I2C bus and equipped with protection circuit against: - short to ground and battery - loss of ground and battery - unsupplied short to battery
- Reset function with configurable delay (RST, RSTDLY)
- I2C bus PowerSO36 (slug-up)
- Enable pin to drive switching regulator and I2C bus logic
- Under/over voltage battery detector (VBATVW) - Under voltage threshold adjustable through dedicated pin (LVWIN)
- Load dump protection
- Independent thermal protection on all regulators
