L78L12 Datasheet | STMicroelectronics

TO-92 SO-8 SOT-89 L78L Positive voltage regulators Features - Output current up to 100 m A - Output voltages of 3.3; 5; 6; 8; 9; 10; 12; 15; 18; 24 V thermal overload protection - Short-circuit protection - No external ponents are required - Available in either ± 4% (A) or ± 8% (C) selection Description The L78L series of three-terminal positive regulators employ internal current limiting and thermal shutdown, making them essentially indestructible. If adequate heat-sink is provided, they can deliver up to 100 m A output current. They are intended as fixed voltage regulators in a wide range of applications including local or oncard regulation for elimination of noise and distribution problems associated with single-point regulation. In addition, they can be used with power pass elements to make high-current voltage regulators. The L78L series used as Zener diode/resistor bination replacement, offers e improvement along with lower quiescent current and lower noise. Maturity status link L78L DS0424 - Rev 27 - November 2020 For further information contact your local STMicroelectronics sales office. .st. Diagram Figure 1. Schematic diagram L78L Diagram AMG160520161300MT DS0424 - Rev 27 page 2/39 L78L Pin configuration Pin configuration Figure 2. Pin connection (top view, bottom view for TO-92) Figure 3. Test...