Datasheet4U Logo Datasheet4U.com

L9659 - Octal squib driver ASIC

General Description

The L9659 is intended to deploy up to 8 squibs.

Squib drivers are sized to deploy 1.2 A minimum for 2 ms, 1.75 A minimum for 1 ms and 1.75 A minimum for 0.65 ms during load dump along with 1.5 A minimum for 2 ms for VRES voltages less than 25 V.

Key Features

  • 8 deployment drivers with SPI selectable firing current and times.
  • Capability to deploy the squib with 1.2 A (min)/2 ms, 1.75 A (min)/1.0 ms and 1.75 A (min)/0.65 ms between VRES of 7 V to 37 V.
  • Capability to deploy the squib with 1.5 A (min)/2 ms between VRES of 7 V to 25 V.
  • Firing capability to deploy all channels simultaneously.
  • Independently controlled high-side and lowside MOS for diagnosis.
  • Analog output available for resistance measurement.
  • Squib short.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
L965EC-TR (L965xx-TR) LED Lamp LEDopto
L965GC-TR (L965xx-TR) LED Lamp LEDopto
L965HC-TR (L965xx-TR) LED Lamp LEDopto
L965SRC-TR (L965xx-TR) LED Lamp LEDopto
L965YC-TR (L965xx-TR) LED Lamp LEDopto

Other Datasheets by STMicroelectronics

Part Number Description
L9654 Quad squib driver and dual sensor interface ASIC
L9658 Octal squib driver and quad sensor interface ASIC
L9637 Monolithic bus driver
L9637D Monolithic bus driver
L9660 Quad squib driver ASIC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
L9659 Octal squib driver ASIC for safety application Features ■ 8 deployment drivers with SPI selectable firing current and times ■ Capability to deploy the squib with 1.2 A (min)/2 ms, 1.75 A (min)/1.0 ms and 1.75 A (min)/0.65 ms between VRES of 7 V to 37 V ■ Capability to deploy the squib with 1.5 A (min)/2 ms between VRES of 7 V to 25 V ■ Firing capability to deploy all channels simultaneously ■ Independently controlled high-side and lowside MOS for diagnosis ■ Analog output available for resistance measurement ■ Squib short to ground, short to battery and MOS diagnostic available on SPI register ■ Capability to deploy the squib the low side MOS is shorted to ground ■ 4 fire enable inputs ■ 5.