L99PM62GXP Datasheet | STMicroelectronics

Features - Two 5V voltage regulators for microcontroller and peripheral supply - No electrolytic capacitor required on regulator outputs - Ultra low quiescent current in standby modes - Programmable reset generator for power-on and undervoltage - Configurable window watchdog and fail safe output - LIN 2.1 pliant (SAEJ2602 patible) transceiver - Advanced HS CAN transceiver (ISO 11898-2/5 and SAE J2284 pliant) with local failure and bus failure diagnosis - HS CAN transceiver supports partial networking - plete 3-channel contact monitoring interface with programmable cyclic sense functionality - Programmable periodic system wake-up feature - ST SPI interface for mode control and diagnosis - 5 fully protected high-side drivers with internal 4-channel PWM generator - 2 low-side drivers with active Zener clamping - 4 internal PWM timers - 2 operational amplifiers with rail-to-rail outputs (VS) and low voltage inputs - Temperature warning and thermal shutdown Applications - Automotive ECU's such as door zone and body control modules Power SSO-36 Description The L99PM62GXP is a power management system IC that provides electronic control units with enhanced system power supply functionality, including various standby modes, as well as LIN and HS CAN physical munication layers. The device’s two low-drop voltage regulators supply the system microcontroller and external peripheral loads such as sensors and provide enhanced system standby functionality with programmable local and remote wake-up capability. In addition, five high-side drivers, two low-side drivers and two operational amplifiers increase the system integration level. The ST standard SPI interface (3.0) allows control and diagnosis of the device and enables generic software development. Table 1. Device summary Package Order codes Tube Tape and reel Power SSO-36 L99PM62GXP L99PM62GXPTR September 2013 Doc ID 17639 Rev 4 1/102 .st. Contents Contents Block diagram and pin descriptions . ....