LD39050 Datasheet | STMicroelectronics

500 m A low quiescent current and low noise voltage regulator ')1[PP ')1[PP Features - Input voltage from 1.5 to 5.5 V - Ultra low-dropout voltage (200 m V typ. at 500 m A load) - Very low quiescent current (20 µA typ. at no load, 100 µA typ. at 500 m A load, 1 µA max. in OFF mode) - Very low noise without bypass capacitor - Output voltage tolerance: ± 2.0% @ 25 °C - 500 m A guaranteed output current - Wide range of output voltages available on request: 0.8 V to 4.5 V with 100 m V step and adjustable from 0.8 V - Logic-controlled electronic shutdown - patible with ceramic capacitor COUT = 1 µF - Internal current and thermal limit - Package DFN6 (3x3 mm) and DFN6 (2x2 mm) - Temperature range: from -40 °C to 125 °C - production data Description The LD39050 provides 500 m A maximum current with an input voltage range from 1.5 V to 5.5 V and a typical dropout voltage of 200 m V. Stability is given by ceramic capacitors. The ultra low drop voltage, low quiescent current and low noise Features make it suitable for low power batterypowered applications. Power supply rejection is 65 d B at low frequencies and starts to roll off at 10 k Hz. The enable logic control function puts the LD39050 in shutdown mode allowing a total current consumption lower than 1 µA. The device also includes short-circuit constant current limiting and thermal protection. Typical applications are mobile phones, hard disks and battery-powered systems. December 2019 This is information on a product in full production. Doc ID15470 Rev 5 1/28 .st. Contents Contents 1 Diagrams - - - - -...