Datasheet4U Logo Datasheet4U.com

LIS244ALH - MEMS motion sensor

General Description

The LIS244ALH is an ultra compact consumer low-power two-axis linear accelerometer that includes a sensing element and an IC interface able to take the information from the sensing element and provide an analog signal to the external world.

Key Features

  • 2.4 V to 3.6 V single supply operation ±2 g / ±6 g user selectable full-scale Low power consumption Output voltage, offset and sensitivity are ratiometric to the supply voltage Factory trimmed device sensitivity and offset Embedded self test RoHS/.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LIS2L01 INERTIAL SENSOR ST Microelectronics
LIS-1024 High Performance Linear CMOS Image Sensor Panavision Imaging
LIS-1024D-LG High Performance Linear CMOS Image Sensor Panavision Imaging
LIS-500 Line Scan Image Sensor Panavision Imaging
LIS302ALB MEMS motion sensor 3-axis - +-2g analog output piccolo accelerometer ST Microelectronics

Other Datasheets by STMicroelectronics

Part Number Description
LIS244AL MEMS motion sensor
LIS202DL MEMS motion sensor
LIS2DE12 MEMS digital output motion sensor
LIS2DH MEMS digital output motion sensor
LIS2DH12 MEMS digital output motion sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LIS244ALH www.datasheet4u.com MEMS inertial sensor high performance 2-axis ±2/±6g ultracompact linear accelerometer Features ■ ■ ■ ■ ■ ■ ■ ■ 2.4 V to 3.6 V single supply operation ±2 g / ±6 g user selectable full-scale Low power consumption Output voltage, offset and sensitivity are ratiometric to the supply voltage Factory trimmed device sensitivity and offset Embedded self test RoHS/ECOPACK® compliant High shock survivability ( 10000 g ) The LIS244ALH has a dynamically user selectable full-scale of ±2 g / ±6 g and it is capable of measuring accelerations over a maximum bandwidth of 2.0 kHz for all axes. The device bandwidth may be reduced by using external capacitances. The self-test capability allows the user to check the functioning of the system.