Datasheet4U Logo Datasheet4U.com

LM301 - SINGLE OPERATIONAL AMPLIFIER

General Description

The LM101A is a general-purpose operational amplifier which offers many

Key Features

  • : supply voltages from ±5V to ±22V, low current drain, overload protection on the inputand output,no latch-up when the common-mode range is exceeded, free from oscillations and compensationwith a single 30pFcapacitor. It has advantages over internally compensated amplifiers in that the compensation can be tailored to the particular.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM301 Operational Amplifiers National Semiconductor
LM301 OPERATIONAL AMPLIFIERS ON Semiconductor
LM301 Operational Amplifiers Linear Technology
LM3017 High Efficiency Low-Side Controller Texas Instruments
LM301A Non Compensated Single Operational Amplifiers ON Semiconductor

Other Datasheets by STMicroelectronics

Part Number Description
LM301A SINGLE OPERATIONAL AMPLIFIER
LM311 Voltage comparator
LM311D Voltage comparator
LM311N Voltage comparator
LM317 1.2V to 37V adjustable voltage regulators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM101A - LM201A LM301A SINGLE OPERATIONAL AMPLIFIER . . . . INPUT OFFSET VOLTAGE INPUT BIAS CURRENT INPUT OFFSET CURRENT SLEW RATE AS INVERTING AMPLIFIER LM101A LM201A 0.7mV 25nA 1.5nA 10V/ µs LM301A 2mV 70nA 2nA 10V/µs N DIP8 (Plastic Package) D SO8 (Plastic Micropackage) DESCRIPTION The LM101A is a general-purpose operational amplifier which offers many features : supply voltages from ±5V to ±22V, low current drain, overload protection on the inputand output,no latch-up when the common-mode range is exceeded, free from oscillations and compensationwith a single 30pFcapacitor. It has advantages over internally compensated amplifiers in that the compensation can be tailored to the particular application : slew rate of 10V/µs and bandwidth of 3.5MHz can be easily achieved.