Datasheet4U Logo Datasheet4U.com

LNBH21 - LNB SUPPLY/CONTROLLER

General Description

Intended for analog and digital satellite STB receivers/SatTV, sets/PC cards, the LNBH21 is a monolithic voltage regulator and interface IC, assembled in POWER SO-20, specifically designed to provide the 13/18V power supply and the 22KHz tone signalling to the LNB downconverter in the antenna or to

Key Features

  • ailable (EXTM). An appropriate DC blocking capacitor must be used to couple the modulating signal source to the EXTM pin. Also in this case, the VOTX output must be.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LNBK20D2 LNB SUPPLY AND CONTROL VOLTAGE REGULATOR ST Microelectronics

Other Datasheets by STMicroelectronics

Part Number Description
LNBH2 LNB SUPPLY AND CONTROLLER
LNBH221 DUAL LNB SUPPLY/CONTROLLER
LNBH23 LNBs supply/controller
LNBH23L LNB SUPPLY/CONTROLLER
LNBH24 DUAL LNB SUPPLY/CONTROLLER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LNBH21 LNB SUPPLY AND CONTROL IC WITH STEP-UP CONVERTER AND I2C INTERFACE s s s s s s s s s s s COMPLETE INTERFACE BETWEEN LNB AND I2CTM BUS BUILT-IN DC/DC CONTROLLER FOR SINGLE 12V SUPPLY OPERATION AND HIGH EFFICIENCY (Typ. 94% @ 750mA) TWO SELECTABLE OUTPUT CURRENT LIMIT (450mA / 750mA) BOTH COMPLIANT WITH EUTELSAT AND DIRECT OUTPUT VOLTAGE SPECIFICATION ACCURATE BUILT-IN 22KHz TONE OSCILLATOR SUITS WIDELY ACCEPTED STANDARDS FAST OSCILLATOR START-UP FACILITATES DiSEqCTM ENCODING BUILT-IN 22KHz TONE DETECTOR SUPPORTS BI-DIRECTIONAL DiSEqCTM2.0 SEMI-LOWDROP POST REGULATOR AND HIGH EFFICIENCY STEP-UP PWM FOR LOW POWER LOSS: Typ. 0.56W @ 125mA TWO OUTPUT PINS SUITABLE TO BYPASS THE OUTPUT R-L FILTER AND AVOID ANY TONE DISTORSION (R-L FILTER AS PER DiSEqC 2.