Datasheet Details
| Part number | LNBP14 |
|---|---|
| Manufacturer | STMicroelectronics |
| File Size | 456.75 KB |
| Description | LNBP supply and control voltage regulator |
| Download | LNBP14 Download (PDF) |
|
|
| Part number | LNBP14 |
|---|---|
| Manufacturer | STMicroelectronics |
| File Size | 456.75 KB |
| Description | LNBP supply and control voltage regulator |
| Download | LNBP14 Download (PDF) |
|
|
|
Intended for analog and digital satellite receivers, the LNBP is a monolithic linear voltage regulator, assembled in PowerSO-20 and PowerSO-10, specifically designed to provide the powering voltages and the interfacing signals to the LNB downconverter situated in the antenna PowerSO-20 10 1 PowerSO-10 via the coaxial cable.
Since most satellite receivers have two antenna ports, the output voltage of the regulator is available at one of two logic-selectable output pins (LNBA, LNBB).
When the IC is powered and put in Stand-by (EN pin LOW), both regulator outputs are disabled to allow the antenna downconverters to be supplied/controlled by others satellite receivers sharing the same coaxial lines.
LNBP20 / LNBP1X series LNBP supply and control voltage regulator (parallel interface) Feature summary ■ Complete interface for two LNBs remote supply and control ■ LNB selection and stand-by function ■ Built-in tone.
| Part Number | Description |
|---|---|
| LNBP10 | LNBP supply and control voltage regulator |
| LNBP10L | LNB supply and control voltage regulator |
| LNBP11 | LNBP supply and control voltage regulator |
| LNBP11L | LNB supply and control voltage regulator |
| LNBP12 | LNBP supply and control voltage regulator |
| LNBP13 | LNBP supply and control voltage regulator |
| LNBP15 | LNBP supply and control voltage regulator |
| LNBP16 | LNBP supply and control voltage regulator |
| LNBP20 | LNBP supply and control voltage regulator |
| LNBP21 | LNBP SUPPLY/CONTROLLER |