M24LR64E-R Datasheet | STMicroelectronics

Dynamic NFC/RFID tag IC with 64-Kbit EEPROM, energy harvesting, I²C bus and ISO 15693 RF interface - production data SO8 (MN) UFDFPN8 (MC) TSSOP8 (DW) 2 x 3 mm in low (6.6 kbit/s) or high (26 kbit/s) data rate mode. Supports the 53 kbit/s data rate with Fast mands - Internal tuning capacitance: 27.5 p F - 64-bit unique identifier (UID) - Read Block & Write (32-bit blocks) Digital output pin - User configurable pin: RF write in progress or RF busy mode Wafer (RUW20) Wafer (SB12I) Features - Belonging to ST25 family, which includes all NFC/RF ID tag and reader products from ST I2C interface - Two-wires I2C serial interface supports 400 k Hz protocol - Single supply voltage: - 1.8 V to 5.5 V - Byte and Page Write (up to 4 bytes) - Random and Sequential read modes - Self-timed programming cycle - Automatic address incrementing - Enhanced ESD/latch-up protection - I²C timeout Contactless interface - ISO 15693 and ISO 18000-3 mode 1 patible - 13.56 MHz ± 7 k Hz carrier frequency - To tag: 10% or 100% ASK modulation using 1/4 (26 Kbit/s) or 1/256 (1.6 Kbit/s) pulse position coding - From tag: load modulation using Manchester coding with 423 k Hz and 484 k Hz subcarriers Energy...