Datasheet4U Logo Datasheet4U.com

M27C405 Datasheet 4 Mbit 512kb X 8 Otp Eprom

Manufacturer: STMicroelectronics

Overview: M27C405 4 Mbit (512Kb x 8) OTP EPROM 5V ± 10% SUPPLY VOLTAGE in READ OPERATION PIN COMPATIBLE with the 4 Mbit, SINGLE VOLTAGE FLASH MEMORY FAST ACCESS TIME: 70ns LOW POWER CONSUMPTION: – Active Current 30mA at 5MHz – Standby Current 100µA PROGRAMMING VOLTAGE: 12.75V ± 0.25V PROGRAMMING TIMES – Typical 48sec. (PRESTO II Algorithm) – Typical 27sec.

General Description

The M27C405 is a 4 Mbit EPROM offered in the OTP (one time programmable) range.

It is ideally suited for microprocessor systems requiring large programs, in the application where the contents is stable and needs to be programmed only one time and is organised as 524,288 by 8 bits.

The M27C405 is pin compatible with the industry standard 4 Mbit, single voltage Flash memory.

Key Features

  • a 2 line control function which accommodates the use of multiple memory connection. The two line control function allows: a. the lowest possible memory power dissipation, b. complete assurance that output bus contention will not occur. For the most efficientuse of thesetwo controllines, E should be decoded and used as the primary device selecting function, while G should be made a common connection to all devices in the array and connected to the READ line from the system control bus. This ensu.

More Datasheets from STMicroelectronics

Part Number Description
M27C400 4 Mbit 512Kb x8 or 256Kb x16 UV EPROM and OTP EPROM
M27C4001 4 Mbit (512Kb x 8) UV EPROM and OTP EPROM
M27C4002 4 Mbit (256Kb x16) UV EPROM and OTP EPROM
M27C1001 1 Mbit (128 Kbit x 8) UV EPROM and OTP EPROM
M27C1024 1 Mbit 64Kb x16 UV EPROM and OTP EPROM
M27C160 16 Mbit 2Mb x8 or 1Mb x16 UV EPROM and OTP EPROM
M27C2001 2 Mbit (256Kb x 8) UV EPROM and OTP EPROM
M27C202 2 Mbit 128Kb x16 UV EPROM and OTP EPROM
M27C256B 256 Kbit (32Kb x 8) UV EPROM and OTP EPROM
M27C320 32 Mbit 4Mb x8 or 2Mb x16 OTP EPROM

M27C405 Distributor