STMicroelectronics M36W108AB
The M36W108A is multi-chip device containing an 8 Mbit boot block Flash memory and a 1 Mbit of SRAM. The device is offered in the new Chip Scale Package solutions: LBGA48 1.0mm ball pitch and LGA48 1.0mm land pitch. The two components, of the package’s overall 9 Mbit of memory, are distinguishable by use of the three chip enable lines: EF for the Flash memory, E1S and E2S for the SRAM.- Min Voltage : 2.7V
- Max Voltage : 3.6V
- Max Operating Temp : 85°C
- Min Operating Temp : -40°C
Source:
Octopart
| Part No. | M36W108AB |
|---|---|
| Datasheet | M36W108AB Download |
| Manufacturer |  STMicroelectronics |
| Description | 8 Mbit 1Mb x8 / Boot Block Flash Memory and 1 Mbit 128Kb x8 SRAM |
| Buy | Stock & Price |
FEATURES
USING TWO CHIP ENABLE INPUTS LOW VCC DATA RETENTION: 2V 1/36 s March 1999 This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice. M36W108AT, M36W108AB Figure 2. LBGA and LGA Connections (Top View) 1 2 3 4 5 6 A W A14 A11 G A10 E1S B VCCS A18 A8 DQ7 DQ5 VSS C A17 NC A5 DQ4 DQ2 DQ1 D VSS EF NC DQ0 A0 A1 E NC NC DQ3 A6 A3 A2 F NC VCCF NC A19 A7 A4 G NC DQ6 A13 RP RB E2S H NC A12 NC A16 A15 A9 AI02508 Table 1. Signal Names A0-A16 A17-A19 DQ0-DQ7 EF E1S, E2S G W RP RB VCCF VCCS VSS NC Address Inputs Address Inputs for Flash Chip Data Input/Outputs, Command Inputs for Flash Chip Chip Enable for Flash Chip Chip Enable for SRAM Chip Output Enable Write Enable Reset for Flash Chip Ready/Busy Output for Flash Chip Supply Voltage for Flash Chip Supply Voltage for SRAM Chip Ground Not Connected InternallyDESCRIPTION
The Flash memory component is identical with the M29W008A device. It is a non-volatile mem...
