DESCRIPTION
On the positive transition of the clock, the Q PIN CONNECTION AND IEC LOGIC SYMBOLS outputs will be set to logic state that were setup at the D inputs. While the (OE) input is low, the 8 outputs will be in a normal logic state (high or low logic level) and while high level the outputs will be in a high impedance state. The output control does not affect the internal operation of flip flop; that is, the old data can be retained or the new data can be entered even while the outputs are off. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage. February 2000 1/11 74AC574 INPUT AND OUTPUT EQUIVALENT CIRCUIT PIN DESCRIPTION
PIN No 1 2, 3, 4, 5, 6, 7, 8, 9 12, 13, 14, 15, 16, 17, 18, 19 11 10 20 SYMBOL OE D0 to D7 NAME AND FUNCT ION 3 State Output Enable Input (Active LOW) Data Inputs Q0 to Q7 3 State Outputs CLOCK GND VCC Clock Input (LOW to HIGH, edge triggered) Ground (0V) Positive Supp...
STMicroelectronics
