DESCRIPTION
PIN CONNECTION AND IEC LOGIC SYMBOLS When the enable input is high, all four analog switches are off. The supply voltage for the digital signals applied to VCC and GND must be whitin the range 0 to 6 V. The voltage swing on the analogue Inputs/Outputs can be between VCC (positive limit) and VEE (negative limit). The voltage between VCC and VEE must not exceed 12V. All inputs are equipped with protection circuits against static discharge and transient excess voltage. July 2001 1/11 M74HC4316 LOGIC DIAGRAM PIN DESCRIPTION
PIN No 1, 4, 10, 13 2, 3, 11, 12 7 15, 5, 6, 14 9 8 16 SYMBOL 1 to 4 I/O 1 to 4 O/I E 1C to 4C VEE GND VCC NAME AND FUNCTION Independent Inputs/Outputs Independent Outputs/ Inputs Enable Inputs (Active LOW) Enable Inputs (Active High) Negative Supply Voltage Ground (0V) Positive Supply Voltage TRUTH TABLE E L L H C H L X SWITCH FUNCTION ON OFF OFF ABSOLUTE MAXIMUM RATINGS
Symbol V CC VI VI/O IIK IOK IO Supply Voltage Control Input Voltage Switch Input/Output...
STMicroelectronics
