STMicroelectronics RHFLVDS2281
The RHFLVDS2281 is an 8-channel, 4x4 crosspoint switch base, on low voltage differential signaling (LVDS) for low-power and high-speed communications. The two 4x4 multiplexers allow connection from any of the four inputs to any of the four outputs. The LVDS outputs operate over a controlled impedance of 100-ohm transmission media that may be printed circuit board traces, back planes, or cables.- Min Voltage : 3V
- Max Voltage : 3.6V
- Channels : 8
- Max Operating Temp : 125°C
- Min Operating Temp : -55°C
Source:
Octopart
| Part No. | RHFLVDS2281 |
|---|---|
| Datasheet | RHFLVDS2281 Download |
| Manufacturer |  STMicroelectronics |
| Description | dual 4x4 crosspoint switch LVDS |
| Buy | Stock & Price |
FEATURES
● LVDS input/output● Multiple configuration: Mux, repeater and splitter
● ANSI TIA/EIA-644 compliant
● 400 Mbps LVDS (200 MHz)
● 200 MHz clock channel
● Cold spare on all pins
● Fail-safe function
● 3.3 V operating power supply
● 4.8 V absolute rating
● Hermetic package
● Power consumption: 220 mW at 3.3 V
● Large input common mode: -4 V to +5 V
● Guaranteed up to 300 krad TID
● SEL immune up to 135 MeV.cm²/mg
● SET/SEU immune up to 22 MeV.cm²/mg
● SMD pin: 5962F14234
● Mass: 1.94 g Datasheet - production data
DESCRIPTION
Packaged and qualified for use in aerospace environments in a low-power, fast-transmission standard, the RHFLVDS2281 operates at 3.3 V power supply (3.6 V max. operating and 4.8 V AMR) and a common mode of -4 V to +5 V. The circuit features an internal fail-safe function to ensure a known state in case of an input short circuit or a floating input. All pins have cold spare buffers to ensure they are in high impedance when VCC is tied to GND. The RHFLVDS2281 can operate over a wide temperature range of -55 °C to +125 °C and it is housed in a hermetic Ceramic Flat-64 package.
