STMicroelectronics SPDCPOE03
SPDCPOE03 is a power module specifically designed to provide an isolated, low-voltage power source to a remote powered device (PD) in power over ethernet (PoE) applications. It is designed to extract power from Ethernet cable when sourced by power sourcing equipment (PSE) also conforming to IEEE802.3af. SPDCPOE03 is rated 10 W and incorporate PD detection and PD classification current signatures required for the PSE.| Part No. | SPDCPOE03 |
|---|---|
| Datasheet | SPDCPOE03 Download |
| Manufacturer |  STMicroelectronics |
| Description | Power over ethernet 10W module |
| Buy | Stock & Price |
FEATURES
●●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
● Input voltage range: 38.5 V to 60 V 10 W output Based on ST devices integrating standard PoE interface and current mode PVM controller IEEE 802.3af compliant (PoE standard) Class 0 (zero), 0-12.96 W input Output voltage 3.3 V Output current 3 A Output voltage ± 5 % Ripple 1 % rms Transient response ±5 %, ½ load to full load Operating temperature range -40 °C to 70 °C Input transient suppressor Under voltage lockout Soft-start Short circuit protection 1500 VDC input/output insulation Input and output will be normally maintained within SELV limit Very compact size, about 86x24.2x17 mm Vertical THT package RoHS compliant UL 94V-0 flammability Device summary Nominal input voltage Nominal output voltage 48 V 3.3 V Max efficiency TBD % Nominal power 10 W
APPLICATIONS
●●
●
●
●
●
●
● The target applications are small low power remote IP appliances. Security system, doors access, cameras, alarms Displays Public address systems Wireless access point Environmental control Telemetry Remote environmental monitoring Table 1.
