SPSB081 Datasheet | STMicroelectronics

Features QFN32L Epad (5.0x5.0x1.0 mm) Product status link SPSB081 Product summary Order code Package Packing SPSB0815-TR SPSB0813-TR SPSB081C5-TR SPSB081C3-TR QFN32L Epad 5.0x50.x1.0 mm Tape and reel - AEC-Q100 qualified - One 5 V (or 3.3 V for SPSB0813 and SPSB081C3) low drop voltage regulator (V1) for microcontroller and peripheral supply - One configurable 5 V or 3.3 V, selectable via SPI, low drop voltage regulator V2 tracker for V1 and with off-board protection - Minimum current limitation of 450 m A for V1 and 400 m A for V2 - No electrolytic capacitor required on regulator outputs - Very low quiescent current in standby modes (typ. 15 µA) - Programmable reset generator for power-on and undervoltage - Configurable window watchdog - LIN transceivers ISO 17987-4/2016 pliant (only for SPSB0815 and SPSB0813) - CAN-FD transceiver (ISO 11898-2/2016, SAE J2284 pliant) with local failure and bus failure diagnosis - plete 2-channel contact monitoring interface (WU1 and WU2 input pins) with programmable cyclic sense functionality. WU2 also with DIR functionality - Programmable periodic system wake-up feature - STM standard serial peripheral interface (32Bit/ST-SPI) - 4 HS drivers for 0.14 A (RON = 7 Ω) suitable to drive external LED modules with high input capacitance value or to also supply external contacts - Internal 10-bit PWM timer for each standalone high-side driver - Buffered supply for all voltage regulators - DIAGN output pin for fail-safe signalization - Current monitor output for all internal high-side drivers - Open-load diagnosis for all outputs - Overcurrent protection for all outputs - V1 overvoltage detection and protection - Device contains temperature warning and protection - Thermal cluster - Limited documentation available for customers that need support when dealing with ASIL requirements as per ISO 26262 Applications - Body control modules (BCM) - Gateway applications - Telematic control...