STMicroelectronics ST20-JPI
The ST20-JPI parallel port to JTAG interface is a host interface to allow connection from a PC parallel port to any JTAG diagnostic controller based ST20 development board. The interface plugs into any standard PC 25 way D-type parallel port. 6 3.1 3.2 3.3 3.4 3.5 3.6 The ST20-JPI front panel| Part No. | ST20-JPI |
|---|---|
| Datasheet | ST20-JPI Download |
| Manufacturer |  STMicroelectronics |
| Description | PC PARALLEL PORT TO JTAG INTERFACE |
| Buy | Stock & Price |
FEATURES
● Desktop mounted parallel port to JTAG interface● Standard 25 way D-type parallel port connection
● Standard 26 way D-type differential OS-Link port for connection to a B300.
● Standard 20 way IDC cable for JTAG connection.
● Plug top power supply
● Supports nibble, byte and EPP mode parallel port standards
DESCRIPTION
Supported parallel port modes are:● Nibble mode
● Byte mode
● EPP mode depending on which mode the host PC can support. Connection to the development target is via a 20 way IDC JTAG connector. Once connected, the development target can be accessed using the MS Windows drivers supplied with the standard ST20 toolset. September 1996 1/10 42 1685 00 Contents 1 2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 2.2 2.3 Hardware Installation - PC .....................................................................................................................
