Datasheet4U.com

ST2054 Datasheet PDF

STMicroelectronics ST2054

The ST2054 power distribution switches is intended for application where heavy capacitive loads and short circuits are likely to be encountered. These devices incorporate 80mΩ N-channel MOSFET high-side power switches for power-distribution systems that require multiple powers switches in a single package. Each switch is controlled by an independent logic enable input.
Part No. ST2054
Datasheet ST2054 Download
Manufacturer
STMicroelectronics
Description CURRENT LIMITED POWER DISTRIBUTION SWITCHES
Buy Stock & Price
ST2054 datasheet page 1 preview

DESCRIPTION

Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external Table 1: Order Codes Type ST2054BD ST2054BDR Temperature Range -40 to 85 °C -40 to 85 °C Package components and allows operation from supplies as low as 2.7 V. When the output load exceeds the current-limit threshold or a short is present, these devices limit the output current to a safe level by switching into a constant-current mode, pulling the overcurrent (OCx) logic output low. A 10ms deglitching circuit provides fault-blanking feature, preventing the OC_N pin to be asserted during hot-insertion or short spikes of overcurrent conditions. When continuous heavy overloads and short circuits increase the power dissipation in the switch, causing the junction temperature to rise, a thermal protection circuit shuts off the switch to prevent damage. Recovery from a thermal shutdown is automatic once the device has cooled sufficiently.
ST2054 page 2 preview ST2054 page 3 preview