Datasheet4U Logo Datasheet4U.com

ST2349 - 4-bit dual supply level translator

General Description

The ST2349 is a 4-bit dual supply level translator which provides the level shifting capability to allow data transfer in a multi-voltage system.

Externally applied voltages, VCC and VL, set the logic levels on either side of the device.

Key Features

  • 45 Mbps (max) data rate when driven by a totem pole driver 4 Mbps (max) data rate when driven by an open drain pole driver Bi-directional level translation without direction control pin Wide VL voltage range of 1.65 to 3.6 V Wide VCC voltage range of 1.80 to 5.5 V Power down mode feature.
  • when either supply is off, all I/Os are in high impedance Low quiescent current (max 24 µA) Able to be driven by totem pole and open d.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ST2341 P-Channel Enhancement Mode MOSFET Stanson
ST2341A P-Channel Enhancement Mode MOSFET Stanson
ST2341S23RG P-Channel Enhancement Mode MOSFET Stanson Technology
ST2341S23RG P-Channel MOSFET VBsemi
ST2341SRG P-Channel Enhancement Mode MOSFET Stanson Technology

Other Datasheets by STMicroelectronics

Part Number Description
ST2349A 4-bit dual supply level translator
ST2329B 2-bit dual supply level translator
ST2329I 2-bit dual-supply level translator
ST2329QTR 2-bit dual supply level translator
ST232EB ESD protected 5V RS-232 transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ST2349 4-bit dual supply level translator without direction control pin Features ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 45 Mbps (max) data rate when driven by a totem pole driver 4 Mbps (max) data rate when driven by an open drain pole driver Bi-directional level translation without direction control pin Wide VL voltage range of 1.65 to 3.6 V Wide VCC voltage range of 1.80 to 5.5 V Power down mode feature – when either supply is off, all I/Os are in high impedance Low quiescent current (max 24 µA) Able to be driven by totem pole and open drain drivers 5.5 V tolerant enable pin ESD performance on all pins: ±2 kV HBM Small package and footprint QFN16 (2.6 x 1.8 mm) package QFN16L (2.6 x 1.