Datasheet4U.com

ST70135A Datasheet PDF

STMicroelectronics ST70135A

The ST70135A is the DMT modem and ATM framer of the STMicroelectronics ASCOT™ chipset. When coupled with ST70134 analog front-end and an external controller running dedicated firmware, the product fulfills ANSI T1.413 ”Issue 2” DMT ADSL specification. The chip supports UTOPIA level 1 and UTOPIA level 2 interface and a non ATM synchronous bit-stream interface.
Part No. ST70135A
Datasheet ST70135A Download
Manufacturer
STMicroelectronics
Description ASCOTTM DMT TRANSCEIVER
Buy Stock & Price
ST70135A datasheet page 1 preview

APPLICATIONS

Routers at SOHO, stand-alone modems, PC modems

GENERAL DESCRIPTION

The ST70135A can be split up into two different sections. The physical one performs the DMT modulation, demodulation, Reed-Solomon encoding, bit interleaving and 4D trellis coding. The ATM section embodies framing functions for the generic and ATM Transmission Convergence (TC) layers. The generic TC consists of data scrambling and Reed Solomon error corrections, with and without interleaving. The ST70135A is controlled and programmed by an external controller (ADSL Transceiver Controller, ATC) that sets the programmable coefficients. The firmware controls the initialization phase and carries out the consequent adaptation operations. s SUPPORTS EITHER ATM (UTOPIA LEVEL s 16 BIT MULTIPLEXED MICROPROCESSOR INTERFACE (LITTLE AND BIG ENDIAN COMPATIBILITY) s ANALOG FRONT END MANAGEMENT s DUAL LATENCY INTERLEAVED PATHS: FAST AND s ATM’S PHY LAYER: CELL PROCESSING (CELL DELINEATION, CELL INSERTION, HEC) s ADSL’S OV...
ST70135A page 2 preview ST70135A page 3 preview