STMicroelectronics STEL12H24
The STEL12H24 is an integrated controlled inrush and overcurrent protection device optimized for power bus architectures. When connected to a 12 V, 5 V or 3.3 V power rail, it is able to limit the inrush current, detect input voltage faults and short-circuit conditions and signal these events via a Power Good output. The low RDSON value of the integrated MOSFET guarantees these conditions and low power dissipation during normal operation.| Part No. | STEL12H24 |
|---|---|
| Datasheet | STEL12H24 Download |
| Manufacturer |  STMicroelectronics |
| Description | Electronic switch |
| Buy | Stock & Price |
FEATURES
● Power Input voltage from 0.5 V to 13.5 V● Analog input voltage from 3.0 V to 13.5 V
● 17 A max DC output current
● Embedded 4.5 mΩ N-channel MOSFET
● Internal output discharge path
● Power Good
● Soft-start controlled with external capacitor
● Undervoltage lockout
● Short-circuit protection
● Thermal protection
● Operating junction temperature range: -40 °C to 125 °C
APPLICATIONS
● Bus protection● Hot-swap and peripheral port protection
● Telecom, Networking and Industrial equipment
● Servers and Gateways
DESCRIPTION
The device is available in a DFN12 leads 3 x 3 mm. DS13821 - Rev 3 - June 2026 For further information, contact your local STMicroelectronics sales office. 1 Diagram Figure 1. Block diagram STEL12H24 Diagram DS13821 - Rev 3 page 2/26 2 Pin configuration Figure 2. Pin connection (top view) STEL12H24 Pin configuration Pin # 1 2 3 4 5 6 7 8 9 10 11 12 Thermal Pad Symbol VIN EN VCC GND SR PG BLEED Table 1. Pin description Function MOSFET drain, to be connected to the thermal pad.
