STGIPQ3H60T-HZ Datasheet | STMicroelectronics

Features - IPM 3 A, 600 V, 3-phase IGBT inverter bridge including 3 control ICs for gate driving and freewheeling diodes - 3.3 V, 5 V, 15 V TTL/CMOS input parators with hysteresis and pull-down/ pull-up resistors - Internal bootstrap diode - Optimized for low electromagnetic interference - Undervoltage lockout - VCE(SAT) negative temperature coefficient - Shutdown function - Interlocking function - Op-amp for advanced current sensing - parator for fault protection against overcurrent - NTC (UL 1434 CA 2 and 4) - Isolation ratings of 1500 Vrms/min. - Up to ±2 k V ESD protection (HBM C = 100 p F, R = 1.5 kΩ) - UL recognition: UL 1557, file E81734 Applications - 3-phase induction motor (ACIM) - Dishwasher - Fans - Kitchen hoods - PMSM / BLDC motor control - Refrigerators and freezers Description This second series of SLLIMM (small low-loss intelligent molded module) nano provides a pact, high-performance AC motor drive in a simple, rugged design. It is posed of six improved short-circuit rugged trench gate fieldstop IGBTs with freewheeling diodes and three half-bridge HVICs for gate driving, providing low electromagnetic interference (EMI) characteristics with optimized switching speed. The package is designed to allow a better and more easily screwed-on heat sink, and is optimized for thermal performance and pactness in built-in motor applications or other low power applications where assembly space is limited. This IPM includes a pletely unmitted operational amplifier and a parator that can be used to design a fast and efficient protection circuit. DS10738 - Rev 8 - August 2022 For further information contact your local STMicroelectronics sales office. .st. STGIPQ3H60T-HL, STGIPQ3H60T-HZ Internal schematic diagram and pin configuration Internal schematic diagram and pin configuration Figure 1. Internal schematic diagram GND (1) T/ SD / OD (2) Vcc W (3) HIN W (4) LIN W (5) OP+ (6) OPOUT (7) OP- (8) Vcc V (9) HIN V (10) LIN V (11) CIN (12) Vcc U (13) HIN U (14)...