STM32C031F6
STM32C031F6 is 32-bit MCU manufactured by STMicroelectronics.
Features
- Includes ST state-of-the-art patented technology
- Core: Arm® 32-bit Cortex®-M0+ CPU, frequency up to 48 MHz
- -40°C to 85°C/105°C/125°C operating temperature
- Memories
- Up to 32 Kbytes of flash memory with protection
- 12 Kbytes of SRAM with hardware parity check
- CRC calculation unit
- Reset and power management
- Voltage range: 2.0 V to 3.6 V
- Power-on / power-down reset (POR/PDR)
- Programmable brownout reset (BOR)
- Low-power modes:
Sleep, Stop, Standby, Shutdown
- Clock management
- 4 to 48 MHz crystal oscillator
- 32 k Hz crystal oscillator with calibration
- Internal 48 MHz RC oscillator (±1 %)
- Internal 32 k Hz RC oscillator (±5 %)
- Up to 45 fast I/Os
- All mappable on external interrupt vectors
- All 5 V-tolerant
- 3-channel DMA controller with flexible mapping
- 12-bit, 0.4 µs ADC (up to 19 ext. channels)
- Conversion range: 0 to 3.6 V
- 8 timers: 16-bit for advanced motor control, four 16-bit general-purpose, two watchdogs, Sys Tick timer
- Calendar RTC with alarm
TSSOP20 (6.4 × 4.4 mm)
LQFP32 (7 × 7 mm)
LQFP48 (7 × 7 mm)
UFQFPN28 (4 × 4 mm)
UFQFPN32 (5 × 5 mm)
UFQFPN48 (7 × 7 mm)
- munication interfaces
- One I2C-bus interface supporting Fastmode Plus (1 Mbit/s) with extra current sink; supporting SMBus/PMBus™ and wake-up from Stop mode
- Two USARTs with master/slave synchronous SPI; one supporting ISO7816 interface, LIN, Ir DA capability, auto baud rate detection and wake-up feature
- One SPI (24 Mbit/s) with 4- to 16-bit programmable bitframe, multiplexed with I²S interface; two extra SPIs through USARTs
- Development support: serial wire debug (SWD)
- All packages ECOPACK 2 pliant
Table 1. Device...
