STM32F101RE Datasheet | STMicroelectronics

STM32F101x C STM32F101x D STM32F101x E High-density access line, ARM-based 32-bit MCU with 256 to 512 KB Flash, 9 timers, 1 ADC and 10 munication interfaces Features - Core: ARM 32-bit Cortex™-M3 CPU - 36 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance - Single-cycle multiplication and hardware division Memories - 256 to 512 Kbytes of Flash memory - up to 48 Kbytes of SRAM - Flexible static memory controller with 4 Chip Select. Supports pact Flash, SRAM, PSRAM, NOR and NAND memories - LCD parallel interface, 8080/6800 modes Clock, reset and supply management - 2.0 to 3.6 V application supply and I/Os - POR, PDR, and programmable voltage detector (PVD) - 4-to-16 MHz crystal oscillator - Internal 8 MHz factory-trimmed RC - Internal 40 k Hz RC with calibration capability - 32 k Hz oscillator for RTC with calibration Low power - Sleep, Stop and Standby modes - VBAT supply for RTC and backup registers 1 x 12-bit, 1 µs A/D converters (up to 16 channels) - Conversion range: 0 to 3.6 V - Temperature sensor 2 × 12-bit D/A converters DMA - 12-channel DMA controller - Peripherals supported: timers, ADC, DAC, SPIs, I2Cs and USARTs Up to 112 fast I/O ports LQFP144 20 × 20 mm LQFP100 14 × 14 mm LQFP64 10 × 10 mm - - 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant - Debug mode - Serial wire debug (SWD) & JTAG interfaces - Cortex-M3 Embedded Trace Macrocell™ Up to 9 timers - Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse...