STM32F103ZF
Overview
- Core: ARM 32-bit Cortex™-M3 CPU with MPU - 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access - Single-cycle multiplication and hardware division
- Memories - 768 Kbytes to 1 Mbyte of Flash memory - 96 Kbytes of SRAM - Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories - LCD parallel interface, 8080/6800 modes
- Clock, reset and supply management - 2.0 to 3.6 V application supply and I/Os - POR, PDR, and programmable voltage detector (PVD) - 4-to-16 MHz crystal oscillator - Internal 8 MHz factory-trimmed RC - Internal 40 kHz RC with calibration - 32 kHz oscillator for RTC with calibration
- Low power - Sleep, Stop and Standby modes - VBAT supply for RTC and backup registers
- 3 × 12-bit, 1 µs A/D converters (up to 21 channels) - Conversion range: 0 to 3.6 V - Triple-sample and hold capability - Temperature sensor
- 2 × 12-bit D/A converters
- DMA: 12-channel DMA controller - Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs
- Debug mode - Serial wire debug (SWD) & JTAG interfaces - Cortex-M3 Embedded Trace Macrocell™ FBGA
