STM32F205VB Datasheet | STMicroelectronics

STM32F205xx STM32F207xx Arm®-based 32-bit MCU, 150 DMIPs, up to 1 MB Flash/128+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 m. interfaces and camera - production data Features - Core: Arm® 32-bit Cortex®-M3 CPU (120 MHz max) with Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution performance from Flash memory, MPU, 150 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1) - Memories - Up to 1 Mbyte of Flash memory - 512 bytes of OTP memory - Up to 128 + 4 Kbytes of SRAM - Flexible static memory controller that supports pact Flash, SRAM, PSRAM, NOR and NAND memories - LCD parallel interface, 8080/6800 modes - Clock, reset and supply management - From 1.8 to 3.6 V application supply + I/Os - POR, PDR, PVD and BOR - 4 to 26 MHz crystal oscillator - Internal 16 MHz factory-trimmed RC - 32 k Hz oscillator for RTC with calibration - Internal 32 k Hz RC with calibration - Low-power modes - Sleep, Stop and Standby modes - VBAT supply for RTC, 20 × 32 bit backup registers, and optional 4 Kbytes backup SRAM - 3 × 12-bit, 0.5 µs ADCs with up to 24 channels and up to 6 MSPS in triple interleaved mode - 2 × 12-bit D/A converters - General-purpose DMA: 16-stream controller with centralized FIFOs and burst support - Up to 17 timers - Up to twelve 16-bit and two 32-bit timers, up to 120 MHz, each with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input - Debug mode: Serial wire debug (SWD), JTAG, and Cortex®-M3 Embedded Trace Macrocell™ &"'! LQFP64 (10 × 10 mm) LQFP100 (14 × 14 mm) LQFP144 (20 × 20mm) LQFP176 (24 × 24 mm) WLCSP64+2 (0.400 mm...