STM32F303ZE Datasheet | STMicroelectronics

STM32F303x D STM32F303x E ARM® Cortex®-M4 32b MCU+FPU, up to 512KB Flash, 80KB SRAM, FSMC, 4 ADCs, 2 DAC ch., 7 p, 4 Op-Amp, 2.0-3.6 V - production data Features - Core: ARM® Cortex® -M4 32-bit CPU with 72 MHz FPU, single-cycle multiplication and HW division, 90 DMIPS (from CCM), DSP instruction and MPU (memory protection unit) - Operating conditions: - VDD, VDDA voltage range: 2.0 V to 3.6 V - Memories - Up to 512 Kbytes of Flash memory - 64 Kbytes of SRAM, with HW parity check implemented on the first 32 Kbytes. - Routine booster: 16 Kbytes of SRAM on instruction and data bus, with HW parity check (CCM) - Flexible memory controller (FSMC) for static memories, with four Chip Select - CRC calculation unit - Reset and supply management - Power-on/Power-down reset (POR/PDR) - Programmable voltage detector (PVD) - Low power modes: Sleep, Stop and Standby - VBAT supply for RTC and backup registers - Clock management - 4 to 32 MHz crystal oscillator - 32 k Hz oscillator for RTC with calibration - Internal 8 MHz RC with x 16 PLL option - Internal 40 k Hz oscillator - Up to 115 fast I/Os - All mappable on external interrupt vectors - Several 5 V-tolerant - Interconnect matrix - 12-channel DMA controller - Four ADCs 0.20 µs (up to 40 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, separate analog supply from 2.0 to 3.6 V - Two 12-bit DAC channels with analog supply from 2.4 to 3.6...