STM32F318K8
STM32F318K8 is 32-bit MCU+FPU manufactured by STMicroelectronics.
- Part of the STM32F318C8 comparator family.
- Part of the STM32F318C8 comparator family.
STM32F318C8 STM32F318K8
Arm®-based Cortex®-M4 32-bit MCU+FPU, 64 KB Flash, 16 KB SRAM, ADC, DAC, 3 P, Op-Amp, 1.8 V
- production data
Features
- Core: Arm® 32-bit Cortex®-M4 CPU with FPU (72 MHz max.), single-cycle multiplication and HW division, DSP instruction
- Memories
- 64 Kbytes of Flash memory
- 16 Kbytes of SRAM on data bus
- CRC calculation unit
- Power management
- Supply: VDD = 1.8 V ± 8% VDDA voltage range = 1.65 V to 3.6 V
- External POR pin
- Low-power: Sleep, Stop
- VBAT supply for RTC and backup registers
- Clock management
- 4 to 32 MHz crystal oscillator
- 32 k Hz oscillator for RTC with calibration
- Internal 8 MHz RC with x 16 PLL option
- Internal 40 k Hz oscillator
- Up to 36 fast I/O ports, all mappable on external interrupt vectors, several 5 V-tolerant
- Interconnect matrix
- 7-channel DMA controller supporting timers, ADCs, SPIs, I2Cs, USARTs and DAC
- 1 × ADC 0.20 μs (up to 11 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, single ended/differential mode, separate analog supply from 1.8 to 3.6 V
- Temperature sensor
- 1 x 12-bit DAC channel with analog supply from 2.4 to 3.6 V
- Three fast rail-to-rail analog parators with analog supply from 1.8 to 3.6 V
- 1 x operational amplifier that can be used in PGA mode, all terminal accessible with analog supply from 2.4 to 3.6 V
LQFP48 (7x7 mm)
UFQFPN32 (5x5 mm)
WLCSP49 (3.417x3.151...
