STUSB06E Datasheet | STMicroelectronics

Features - - - - - - - - - - - pliant to USB v2.0 for full-speed (12 Mb/s) and low-speed (1.5 Mbps) operation HBM = ± 9 k V on D+, D- lines, ± 7 k V on VREG ± 6 k V ESD pliant to IEC-61000-4-2 on D+, D-, VREG lines Separate I/O supply with operation down to 1.6 V Integrated 150 kΩ switchable pull-up from D+ to VREG Supports host negotiation protocol (DP pull-up auto-connection after SE0) SEO active low interrupt in HNP mode (INT, VCC_IO referred) Very low power consumption to meet USB 'suspend' current requirements No power supply sequencing requirements Software controlled re-enumeration (SOFTCON) Available in small BCC++16L package 3 mm x 3 mm max thickness 0.80 mm halogen free Ro HS pliant package BCC++16L (3 mm x 3 mm) Description The STUSB06E is a single chip transceiver that plies with the physical layer specifications of the Universal Serial Bus (USB) v2.0 standard. It is powered by external 3.3 V supply and has an integrated 150 kΩ resistor to implement charger detection with weak pull-up method. .Data Sheet.net/ The STUSB06E also supports sharing mode when VREG is not present, which allows the D+/Dlines to be shared with other serial protocols. It supports both full-speed (12 Mbps) and lowspeed (1.5 Mbps) operation. It is also designed to operate down to 1.6 V so that it is patible with lower system voltages of most portable systems, which include cell phones, PDAs and MP3 players. Applications - - - - Mobile phones PDAs MP3 players Digital still cameras Table 1. Device summary Order code STUSB06EHTR Package BCC++16L (3 mm x 3 mm) Packaging 3000 parts per reel December 2008 Rev 1 1/20 .st. 20 Datasheet pdf - http://..co.kr/ Contents 1 2 3 4 5 Application - - - - - - - - - . . . . 3 Pin configuration - - - - - - - - . . . 4 Maximum ratings - - - - - - . . . ....