STUSB4761 Datasheet | STMicroelectronics

Description Standalone USB PD controller (source, autorun) Package QFN16 (3x3 mm) Marking Features - Type-C and USB PD controller (with autorun) - Provider role - up to 5 PDO profiles - Programmable VBUS voltage and current protections - High-side current sensing - Integrated CC/CV regulation - 50 m A VCONN switch (OVP and OCP) - E-marked cable support for 100 W applications - Ambient temperature adaptive power and overtemperature protection - Data role and VCONN swap answer support - Factory mode configuration over CC pin - Integrated VBUS discharge control path - Integrated VBUS switches gate driver (PMOS) - Short-to-VBUS protections - VDD = [4.1 V; 22 V] - AMR = 28 V - Temperature range: -40 °C up to 105 °C - ESD = 1.5 k V CDM / 4 k V HBM - Certified according to: - USB Power Delivery specifications (rev 3.0) - USB type-C™ (rev 1.4) - TID: 2070 Applications - AC adapters and power supplies for puter, consumer, portable consumer and industrial applications - Smart plugs and wall adapters Description The STUSB4761 addresses USB type-C and Power Delivery provider devices. Thanks to default parameters stored in an internal non-volatile-memory, the STUSB4761 implements up to 5 PDOs in order to negotiate autonomously a Power Delivery contract with a sink without any internal or external software (autorun mode). A CC/CV regulation loop allows a fully regulated power management unit (AC/DC) to be implemented with a minimum BOM cost. DS13141 - Rev 3 - September 2021 For further information contact your local STMicroelectronics sales office. .st. Functional...