Datasheet4U Logo Datasheet4U.com

TS419 - 360mW mono amplifier

General Description

The TS419 / TS421, is a monaural audio power amplifier driving in BTL mode a 16 or 32 Ω earpiece or receiver speaker.

The main advantage of this configuration is to get rid of bulky output capacitors.

Key Features

  • Operating from VCC = 2 V to 5.5 V.
  • Standby mode active high (TS419) or low (TS421).
  • Output power into 16 Ω: 367 mW @ 5 V with 10% THD+N max or 295 mW @ 5 V and 110 mW @ 3.3 V with 1% THD+N max.
  • Low current consumption: 2.5 mA max.
  • High signal-to-noise ratio: 95 dB (A) at 5 V.
  • PSRR: 56 dB typ. at 1 kHz, 46 dB at 217 Hz.
  • Short-circuit limitation.
  • ON/OFF click reduction circuitry.
  • Available in MiniSO8 and.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TS4148 0.35 / 0.5AMPS High Speed Switching Diode Taiwan Semiconductor
TS4148C 200mW High Speed SMD Switching Diode Taiwan Semiconductor
TS4148RW 350mW High Speed SMD Switching Diode Taiwan Semiconductor
TS4148RWG 350 mW High Speed SMD Switching Diode Taiwan Semiconductor
TS4148RX 400mW High Speed SMD Switching Diode Taiwan Semiconductor

Other Datasheets by STMicroelectronics

Part Number Description
TS4040 2.5V micropower shunt voltage reference
TS4041 1.225V micropower shunt voltage reference
TS420 Sensitive gate 4A SCRs
TS420-600B Sensitive gate 4A SCRs
TS420-600H Sensitive gate 4A SCRs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TS419IST : MiniSO8 Standby 1 Bypass 2 VIN+ 3 VIN- 4 8 VOUT2 7 GND 6 VCC 5 VOUT1 TS421IQT : DFN8 GND 1 VOUT2 2 Standby 3 Bypass 4 8 VCC 7 VOUT1 6 VIN+ 5 VIN- Maturity status link TS419, TS421 TS419, TS421 Datasheet 360 mW mono amplifier with standby mode Features • Operating from VCC = 2 V to 5.5 V • Standby mode active high (TS419) or low (TS421) • Output power into 16 Ω: 367 mW @ 5 V with 10% THD+N max or 295 mW @ 5 V and 110 mW @ 3.3 V with 1% THD+N max. • Low current consumption: 2.5 mA max. • High signal-to-noise ratio: 95 dB (A) at 5 V • PSRR: 56 dB typ.